Un atelier de fabrication numérique
accessible à tous !

F05 – Vinyl cut

Tarif réduit : 35€ Tarif normal : 45€ Tarif entreprise : 90€

Presentation

We review the drawing techniques suitable for the vinyl cutting machine (line thickness, doubling line, etc.) as well as the basic settings to carry out your productions in complete safety (cutting speed, cutting pressure, etc.)).

Organization </ strong>

  • Maximum number number of participants: 4
  • Duration: 1h30 + 15 min cutting
  • Beginner level
  • Material required: none

Cela pourrait également vous intéresser
Crédit Photo :
F10 – CFR 3D printing with Markforged Mark Two
F10 – CFR 3D printing with Markforged Mark Two

Presentation

Training in 3D printing with a Continuous Fiber Reinforcement (CFR) printer.

With this training, available only on request, you will learn how to use the Markforged Mark Two 3D printer. Its special feature is to be able to add continuous fibres (carbon, glass, or Kevlar) inside the printed part, which are also extruded using a nozzle and thus fused with the part, giving it tenfold strength as well as other properties, depending on the type of fibre chosen. 

Organisation

  • Max. number of participants: 3 
  • Duration: 3 h
  • Level: beginner
  • Required equipment: none

This training course is only available on request. Contact us

F10 – CFR 3D printing with Markforged Mark Two

Available on request
Crédit Photo :
F07 – 3D modelling (Fusion 360)
F07 – 3D modelling (Fusion 360)

Presentation

This training course covers the more complex modelling functions, including surface design, as well as the drawing, assembly and animation modules of Fusion 360.

Organisation

  • Max. number of participants: 4
  • Duration: 3h
  • Level: intermediary
  • Required equipment: you can bring your laptop if you wish. In this case, the software will have to be installed. Remember to bring a 3-button mouse.

F07 – 3D modelling (Fusion 360)

Intermediary level
Crédit Photo :
F04 – Digital embroidery machine
F04 – Digital embroidery machine

Presentation

We deal with the two main aspects of digital embroidery: setting up the embroidery pattern (order, direction, colours, stitch used) and the handling of the machine (filling the bobbin, setting up the bobbin, choosing the drum, starting the embroidery).

Organisation

  • Max. number of participants: 2
  • Duration: 1h30 + 15 min of embroidery
  • Level: beginner
  • Required equipment: none

F04 – Digital embroidery machine
Crédit Photo :
F02 – 3D printing
F02 – 3D printing

Presentation

We invite you to discover the general principle of 3D printing and its different technologies. We also discuss the main parameters for successful printing, going into more detail about the slicer’s functions and options. The aim is to enable you to serenely approach parts with “complex” shapes.

Organisation

  • Max. number of participants: 4
  • Duration: 1h30 + 30 min of printing
  • Level: beginner
  • Required equipment: none

F02 – 3D printing

X
Scroll to Top

Start typing and press enter to search

Nos newsletters

Attractivité
Fablab Descartes
Incubateur Descartes